Combination of Solid‐Phase Micro‐Extraction and Direct Analysis in Real Time‐Fourier Transform Ion Cyclotron Resonance Mass Spectrometry for Sensitive and Rapid Analysis of 15 Phthalate Plasticizers in Beverages

A method for rapid identification and quantification of phthalate plasticizers in beverages was developed. A number of 15 phthalate plasticizers which covered all the phthalates concerned in the US Consumer Product Safety Improvement Act (CPSIA), European Union legislations and Chinese national standards (GB) were analyzed. By a combined solid‐phase micro‐extraction (SPME) and direct analysis in real time mass spectrometry (DART‐MS) approach, phthalates at sub‐ng·mL^?1 levels can be qualitatively and quantitatively analyzed in a short time. The use of ultrahigh‐resolving power and the accurate mass measurement capacity naturally provided by Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR‐MS) minimizes the matrix interferences and thus enables the evaluation of phthalates in a complex matrix without extensive sample handlings or preparations. The limits of quantification (LOQs) were estimated to be at 0.3–5.0 ng·mL^?1, lower than the Maximum Residue Limit (MRL) regulated by the European Union legislations (2007/19/EC) in foods, beverages, food packaging and toys (0.3–30 ng·mL^?1). This rapid and easy‐to‐use SPME‐DART‐FT‐ICR‐MS method provided a relatively high‐throughput and powerful analytical approach for quick testing and screening phthalates in beverages and water samples to ensure food safety.     

不同产地黄芪的红外光谱鉴别研究

采用红外光谱、二阶导数红外光谱和二维相关红外光谱,对四种不同产地的黄芪原药材进行了鉴别研究。结果表明:不同产地黄芪的红外光谱和二阶导数红外谱具有一定的相似度,与淀粉的红外谱图比对,4个不同产地的黄芪均含有淀粉,其中陕西绥德产黄芪的淀粉含量比其它3个产地黄芪的都要高。山西浑源和山西天镇产黄芪谱图的1 510、1 425cm-1木质素特征峰比内蒙古固阳和陕西绥德产黄芪的更为明显,说明前二者产黄芪中木质素含量高于后二者产黄芪。在二维相关红外谱图上,根据4个产地黄芪的相对峰强度的差异,可进行产地的鉴别。研究结果表明对于不同产地黄芪的鉴别,红外三级鉴定法是一种快速有效的新方法。     

Raman spectroscopic detection for liquid and solid targets using a spatial heterodyne spectrometer

Spatial heterodyne Raman spectroscopy (SHRS) is a new type of effective method for the analysis of structure and composition of liquid and solid targets with the characteristics of no moving parts, high spectral resolution, high optical throughput and large field of view. The technique is very suitable for detecting the targets from long distances or under the conditions with ambient light, which is essential for the exploration of planetary surface. In order to have a better understanding of the ability of SHRS for the detection of liquid and solid targets, a breadboard was designed, built and calibrated. Signal to noise was estimated at different integration time or laser power for carbon tetrachloride. Pure materials or materials contained in bottles were both tested. The mixture of organic liquids or inorganic solids were tested. In order to test the detection ability for natural targets, some composition‐unknown rocks and pebbles were tested. The results have shown that SHRS can meet the requirements for the detection of weak Raman signal scattered from artificial or natural targets. Standoff detection of sulfur from 5‐m or 10‐m distance without using any telescope or collimation optics was also tried to test the high optical throughput of SHRS. The potential feasibility of standoff detection has been proved. Copyright © 2015 John Wiley & Sons, Ltd.     

Axisymmetric problem of a nonhomogeneous elastic layer

Summary The paper deals with a theoretical treatment of elastic behavior for a medium with nonhomogeneous materials property, which is defined by the relation , i.e., shear modulus of elasticity G varies with the dimensionless axial coordinate by the power product form, arbitrarily. Fundamental differential equation for such nonhomogeneous medium has been already proposed in [5]. It is given by a second-order partial differential equation. However, it was found that the fundamental equation is not sufficient in general to solve several kinds of boundary-value problems. On the other hand, it is shown in the present paper making use of the fundamental equations system for a nonhomogeneous medium, which has been proposed in our previous paper [7], it is possible to solve axisymmetric problems for a thick plate (layer) subjected to an arbitrarily distributed load or a concentrated load on its surfaces. Numerical calculations are carried out for several cases, taking into account the variation of the nonhomogeneous parameter m. The numerical results for displacements stress and components are shown in graphical form. Accepted for publication 25 March 1997     

Dynamic Analysis of an Infinite Cylindrical Hole in a Saturated Poroelastic Medium

In this paper, the dynamic response of an infinite cylindrical hole embedded in a porous medium and subjected to an axisymmetric ring load is investigated. Two scalar potentials and two vector potentials are introduced to decouple the governing equations of Biot’s theory. By taking a Fourier transform with respect to time and the axial coordinate, we derive general solutions for the potentials, displacements, stresses and pore pressures in the frequency-wave-number domain. Using the general solutions and a set of boundary conditions applied at the hole surface, the frequency-wave-number domain solutions for the proposed problem are determined. Numerical inversion of the Fourier transform with respect to the axial wave number yields the frequency domain solutions, while a double inverse Fourier transform with respect to frequency as well as the axial wave number generates the time-space domain solution. The numerical results of this paper indicate that the dynamic response of a porous medium surrounding an infinite hole is dependant upon many factors including the parameters of the porous media, the location of receivers, the boundary conditions along the hole surface as well as the load characteristics.     

THREE-DIMENSIONAL ANALYSIS OF A MAGNETOELECTROELASTIC HALF-SPACE UNDER AXISYMMETRIC TEMPERATURE LOADING 1)

考虑力-电-磁-热等多场耦合作用, 基于线性理论给出了磁-电-弹性半空间在表面轴对称温度载荷作用下的热-磁-电-弹性分析, 并得到了问题的解析解. 利用Hankel 积分变换法求解了磁-电-弹性材料中的热传导及控制方程, 讨论了在磁-电-弹性半空间在边界表面上作用局部热载荷时的混合边值问题, 利用积分变换和积分方程技术, 通过在边界表面上施加应力自由及磁-电开路条件, 推导得到了磁-电-弹性半空间中位移、电势及磁势的积分形式的表达式. 获得了磁-电-弹性半空间中温度场的解析表达式并且给出了应力, 电位移和磁通量的解析解. 数值计算结果表明温度载荷对磁-电-弹性场的分布有显著影响. 当温度载荷作用的圆域半径增大时, 最大正应力发生的位置会远离半无限大体的边界; 反之当温度载荷作用的圆域半径减小时, 最大应力发生的位置会靠近半无限大体的边界. 电场和磁场在温度载荷作用的圆域内在边界表面附近有明显的强化, 而磁-电-弹性场强化区域的强化程度跟温度载荷的大小和作用区域大小相关. 本研究的相关结果对智能材料和结构在热载荷作用下的设计和制造具有指导意义.     

三维运动接触问题的广义Галин定理

本文给出了求解一类相当普遍的三维运动接触问题的分析解法,并且把仅仅对静态接触问题成立的 定理推广到动力学情形,作了严格证明。作为例子,对接触区为椭圆的情形给出了积分形式的解,并且作了数值计算,由这些结果可以看出运动压体速度的效应。     

关于陀螺信号处理中小波基选取的研究

在建立陀螺漂移的数学模型的基础上，使用不同的小波基对陀螺输出信号进行多尺度小波分解，去除由噪声产生的小波系数，从而达到消除噪声的目的。从不同小波基的滤波效果来看，双正交样条小波Biorl.5具有较好的去噪效果，从而也验证了小波对称性在陀螺信号去噪中的重要性。     

基于小波变换的精密测试转台测角系统的故障诊断

针对精密测试转台测角系统的突变性故障、饱和故障和高频干扰故障,研究并提出了一种基于离散小波变换的故障特征提取方法。这种方法采用db4小波函数对测角系统激磁信号进行小波变换,将原始信号分解为近似信号和细节信号。根据分解得到第一层的细节信号,可以定位突变性故障和饱和故障。通过多层分解,确定近似信号和细节信号的最大幅值,根据信噪比大小可以确定是否存在高频干扰故障。实验结果显示,通过该方法可以实现对测角系统激磁电源故障准确的故障特征提取和定位,提高了精密测试转台的安全性和可靠性。     

吹吸扰动对壁湍流相干结构的影响

采用热线风速仪测量受吹吸扰动的壁湍流边界层的流向速度，用傅里叶变换和子波变换研究 吹吸扰动对壁湍流能谱的影响，结果显示施加的低频扰动使边界层内层大尺度结构的能量减 少，小尺度结构的能量有所增强，远离壁面时扰动强度逐步衰减直到在外层中消失；通过VITA 法和子波变换法检测猝发事件，表明该扰动降低了猝发强度，使猝发周期延长，条件平均速 度波形的幅值降低、持续时间变短，说明扰动明显抑制了相干结构的猝发过程. 利用子波变 换可以实现湍谱分析，能有效检测猝发中的湍流结构，是一种客观的分析工具.